Ghost 2 Immobiliser Installation
A Ghost immobiliser shields your vehicle from key hacking and cloning. It also helps stop door lock picks. It works by using the vehicles buttons from the factory (such as steering wheel control, door panel and the central console) to create an individual pin code push sequence that is changeable each time you use it.
It is virtually impossible to determine this sequence, which is why the vehicle is not able to start. It also helps prevent the device from spoofing signals and jamming.
No Key Fobs or LED Signs
Car theft is a massive problem with many thieves targeting vehicles that are keyless. If they can get the signal from your vehicle keys, or even copy your key fob, they could use it to start your vehicle and then drive off with it. Installing an immobiliser into your van or car is a great idea. It's an easy device that blocks the engine from running without the use of a key or immobiliser code. There are several different types of immobilisers that are available. Some immobilisers are designed to be hidden inside your car, whereas others are weatherproof. They can be installed on a prominent place.
One of the most effective and most common types is a Ghost Immobiliser. This is an weatherproof device that connects to the CAN network of your vehicle. It works in a similar way as your key fob, but does not feature any LEDs or even a button on the steering wheel to signal its presence. It sits within your car or van and is in direct communication with the ECU.
It's also inaccessible to any vehicle diagnostic tools and will repeatedly block your vehicle from starting until the correct PIN code is entered. The system is also tamper-proof, so it's impossible for a thief to remove or modify the ghost device.
The Ghost Immobiliser is a great protection for your car or van from key cloning and hacking. This is done using a PIN code that you alone are aware of. You can pick your own disarm sequence, which can be as short or long as you like. Then, you enter it into the Ghost app on your phone whenever you want to drive. The system can be transferred to a different vehicle if you move throughout the life of owning it.
These systems are often linked to the OBD port which allows them to recognize your key fob or key. However, high-tech thieves have found ways to hack these systems to start the vehicle, even if the key isn't present. It is for this reason that it is suggested to install an immobiliser that is ghost. The device will stop your Mercedes from starting unless an appropriate PIN code is entered. You can set this and only you and your installer are aware of it.
No OBD Port Hacking
The ghost immobiliser blocks your car from starting without the correct pin code. It is designed to safeguard your vehicle against key cloning and other common types of theft.
Ghost immobilisers work silently and stealthily via the CAN data network, which is different from other security systems that use key fobs or LED indicators. This means that thieves cannot detect the presence of a ghost immobiliser even if they're using advanced technology for RF scanning and code grabbing technology.
The device is located in the engine bay, and is connected to the ECU. It connects with the buttons that are factory-installed in your vehicle, and allows you to design a unique button sequence to start your vehicle. This can be entered through the steering wheel, door ghost immobilisers, the tracker panels, or even the centre console. It can be changed at any point and include up to 20 digits in the PIN.
Modern cars are loaded with CAN bus information, which means thieves can employ different methods to hack into your vehicle and disable security systems. One of them is the OBD port (On Board Diagnostics). With the right tools thieves can gain access to the OBD port on your car and utilize a laptop to deactivate your car's alarm, code new key and then drive away. This hack is very efficient and can be accomplished in minutes.
The Autowatch Ghost immobiliser stops this by communicating with the ECU through the CAN data network. It is not detected by vehicle diagnostics, and there are no radio signals, which makes it nearly impossible for thieves to locate and tamper with the system. The ghost is also invulnerable to jamming devices which can be used to disable other security systems inside your car.
You can also switch the ghost into Service mode. This lets you offer your car for valet parking, or service without having to give anyone your keys or buttons fobs. The ghost will then leave Service mode according to speed and time or by entering the pin code you have set up. This is a great method to safeguard your car from high-tech car thieves while at work or out on vacation.
No Key Theft
The ghost 2 immobiliser is an CAN bus device. This means it is part of the vehicle's CAN data networks meaning it cannot be identified by any diagnostic tool that thieves use to scan & attack modern cars. It doesn't transmit radio signals, like trackers, and therefore isn't able to be detected by anyone but you or your expert installer.
Ghost immobiliser is distinct from other car security systems which depend on key fobs or LED indicators. It uses the buttons on your vehicle to generate a unique sequence of disarming. This sequence can be as long or short as you want, and it needs to be entered before your ghost immobiliser near me J can be driven.
You can change your PIN at any time, making sure that even if another person your keys or forget your own PIN for a few hours or so, your vehicle is still safe. This is especially helpful when you are dropping your vehicle off to be serviced or cleaned or you have to take it to the local garage to be repaired - you can still drive it with no worries about someone stealing your car.
The Ghost device's smart thief-proofing technology is an innovative device. It's a great alternative to physical deterrents like a wheel clamp or steering wheel lock. It is harder to deter because it doesn't rely on any external components and does not emit any signal.
The only way in which the Ghost can be defeated is through physically altering the wiring of your CAN data network. This is something we do not recommend at all. It is therefore vital that you use a TASSA authorized Ghost Installations team to complete your installation. Our team is highly qualified and insured. This gives you assurance that your Ghost Car Security system will be a genuine Tassa approved product.
No Key Cloning
The Ghost 2 is the latest immobiliser that secures your Lexus. It safeguards your vehicle from hacking, key-cloning, and key theft. By using the original buttons of your vehicle, it creates a discrete pin code push sequence that you can control which means only you can start your vehicle. The system is completely hidden and sealed into the harness of your vehicle which makes it inaccessible to thieves. If a criminal was able to access the system to the system, they would be stopped from leaving the vehicle based on the speed of their vehicle or entering the code. You can also put the car into service mode to temporarily start and drive your car. This can be done using the app or a Bluetooth tag that is sold separately. It can also be removed at any point.
Modern day key cloning equipment is very easy to purchase online and can allow criminals to steal your car without even having the original keys. This is why having an immobiliser is essential, especially when you've spent a lot on your pride and joy.
Ghost immobilisers differ from the factory immobiliser you get in your vehicle. Immobilisers that are factory fitted rely on a chip in the ECU (Electronic Control Unit) to communicate with the fob or key and then start the engine. Ghost immobilisers add an extra layer to your vehicle's security, making it impossible for the engine to start without entering a unique pin number or code. This stops hackers as well as device signal jamming, spoofing and other methods to unlock the factory-installed immobiliser.
The most appealing thing about a ghost immobiliser? It is virtually impossible to disable it or hack it. This is because the ghost immobiliser is linked to CAN bus and operates in a way that is invisible to thieves. This is an advantage, as it keeps the vehicle that was stolen from being driven back because it won't start.
It also prevents a vehicle from being towd away because the Ghost will automatically lock when it detects the trigger speed of 0mph. This is another great benefit as it will stop thieves from being able to remove the ghost, and then take your car away.